60
Detailed Settings for Various Functions (Utility Screen)
If you’ve set the system parameter Sound Perspective (p. 57) to
“A:DRY B:AMBIENCE,” only the ambience component will be output
from Output B.
You can obtain a richer sound field by connecting external speakers
to Output B.
* In this case, set the system parameter “Fixed Out” (p. 59) to the “ON”
setting. When you set this to “ON,” please note that the ambience
will always be output at a fixed volume from the external speakers,
regardless of the position of the Volume knob.
Or if you’ve set the system parameter Sound Perspective to “GRAND
AMBIENCE” for multi-channel output, you should place your
speakers in the areas shown in the diagram below.
Place the Output A speakers near the performer, and place the
Output B speakers farther away.
The volume balance, spacing of the Output B speakers,
direction, and distance to the speakers can be adjusted
according to your taste.
fig.SPrayout.eps
The parameters in this group are the same as the parameters that
you can edit in the Tone screen.
fig.UtilTone.eps
For an explanation of the parameters and their values, refer to
“Customizing the V-Piano Grand’s Sounds” (p. 41).
ORIGINAL
This screen shows the name of the preset tone that was the basis of
the customized tone.
* You cannot change the preset tone that was the basis of the
customized tone.
Tone EQ
fig.UtilToneEQ.eps
Each tone allows you to apply an equalizer to specific regions
(“Zones”). This is called the Tone EQ. For each tone you can specify
four Zones, and make different settings for each Zone.
fig.zone-1.eps
Of the four Zones, the settings of Zone 4 will take priority.
Volume
Range Min
0–127
Specifies the range of volume
adjustment that is accessible using
the Volume knob. For example, you
can set this to prevent the volume
from becoming dangerously loud
or entirely silent when a child
inadvertently operates the Volume
knob.
Volume
Range Max
0–127
Using External Speakers to Perform with a
Full Sound Field
Parameter
Value Description
V-Piano Grand
Performer
1/L 2/R
3/L 4/R
Output A
Output B
Tone Parameter Settings
(2. Tone Parameter)
Zone 4
Zone 3
Zone 2
Zone 1
Priority
V-Piano-Grand_e.book 60 ページ ２０１１年２月１０日 木曜日 午後１２時４分
To Next Page
Loading...
Need help?
General
