69
Detailed Settings for Various Functions (Utility Screen)
This operation will erase all data stored in internal memory or USB
memory.
When you execute this format operation, all data stored in
internal memory or USB memory will be erased. Before you
proceed, make sure that internal memory or USB memory does
not contain important data.
Formatting the internal memory will erase data in the area that
contains setup files and song files. User setups, user tones, and
system settings will not be erased. If you want to erase this
data, execute the “Factory Reset (Factory Reset All)” (p. 72)
operation.
Formatting USB memory will not only erase all data in memory,
it will also prepare the memory so that it can be used with the
V-Piano Grand. Before newly purchased USB memory or USB
memory that has been used by a computer can be used with
the V-Piano Grand, you must first format the USB memory on
the V-Piano Grand.
1.
In the File screen, turn the [Value] dial to select “Format,”
and then press the [Enter] button or the [F1 (ENTER)]
button.
fig.UtilFormat01.eps
2.
The screen will indicate “Erases entire memory content.”
fig.UtilFormat02.eps
3.
Press the [F1 (MEDIA)] button to specify the memory that
you want to format.
4.
To begin formatting, press the [F4 (EXECUTE)] button.
A confirmation message will appear.
fig.UtilFormat03.eps
If you decide to cancel without formatting, press the [F1 (CANCEL)]
button.
5.
To begin formatting, press the [F4 (OK)] button.
The message “Executing...” is shown while formatting is being
done. Never turn off the power or disconnect USB memory
during this time.
6.
When formatting is finished, press the [Exit] button to
return to the previous screen.
Formatting Internal Memory or USB
Memory (Format)
Value
Description
INT
V-Piano Grand’s internal memory
USB USB memory connected to the USB Memory connector
V-Piano-Grand_e.book 69 ページ ２０１１年２月１０日 木曜日 午後１２時４分
To Next Page
Loading...
Need help?
General
