Roland GRAND User Manual

29
Playing
This section explains how to play the V-Piano Grand.
The V-Piano Grand contains 30 different preset tones. Here’s how to select and play these tones.
The sound will be interrupted when you switch tones, but this does not indicate a malfunction.
1.
Access the tone screen.
The tone screen will appear when you switch on the V-Piano Grand’s power.
If any screen other than the tone screen is shown, press the [Exit] button.
2. Press one of the [Tone 1]–[Tone 4] buttons.
You can assign frequently used tones to the [Tone1]–[Tone4] buttons (p. 30).
3.
Try selecting other preset tones.
Make sure that the tone number is highlighted, and turn the [Value] dial.
This allows you to select grand tone numbers 001–002 and preset tone numbers 001–030.
If the tone number is not highlighted, press the [Exit] button.
Selecting a user tone
If you’ve saved user tones, you can select them from the tone screen.
4.
Continue turning the [Value] dial toward the right.
Following preset tone No. 030, you’ll be able to select user tones.
For details on customizing and saving a tone, refer to “Customizing the V-Piano Grand’s Sounds” (p. 41).
Selecting and Playing a Sound
V-Piano-Grand_e.book 29 ページ ２０１１年２月１０日 木曜日 午後１２時４分

Roland GRAND Specifications

General

Brand	Roland
Model	GRAND
Category	Musical Instrument
Language	English