72
Detailed Settings for Various Functions (Utility Screen)
This will erase the user tones and user setups stored in the V-Piano
Grand, resetting the V-Piano Grand’s settings to the factory-set
state.
When you execute “Factory Reset All,” all user setups and user
tones will be lost. If you want to keep the contents of memory,
save your data to USB memory (sold separately) as a setup file
(p. 64).
All operations are disabled while the Factory Reset is being
executed. Moreover, no sound be heard even if you play the
keyboard.
If the V-Piano Grand is connected via USB to your computer,
disconnect the USB cable before you execute this operation.
Factory Reset does not return the internal memory (the area in
which song data and setup files are stored) to the factory-set
state. If you want to return the V-Piano Grand’s internal
memory to the factory-set state, you must execute the format
operation on the internal memory (p. 69).
1.
In the Initialize screen, turn the [Value] dial to select
“Factory Reset All,” and then press the [Enter] button or
the [F1 (ENTER)] button.
fig.UtilInit05.eps
A confirmation message will appear.
The screen will indicate “Erases entire memory content and restores
factory presets.”
2.
To execute the factory reset, press the [F4 (EXECUTE)]
button.
fig.UtilInit06.eps
To cancel without executing the factory reset, press the [Exit]
button.
3.
A confirmation message will appear once again.
To execute the factory reset, press the [F4 (OK)] button.
fig.UtilInit07.eps
If you decide to cancel without executing, press the [F1 (CANCEL)]
button or the [Exit] button.
The message “Executing... Don’t Power OFF” is shown while the
factory reset is being executed. Never turn off the power
during this time.
When the factory reset is finished, the screen will indicate “Power
off, then on.”
4.
Turn the V-Piano Grand’s power off, and then on again.
When you select “10. Song,” the Song screen will appear.
For details on operations in the Song screen, refer to “Playing Songs
and Recording Your Performances” (p. 51).
fig.UtilSong01.eps
Here’s how a setup you’ve created can be saved as a user setup.
For details, refer to “Saving Your Settings (Setups)” (p. 48).
fig.UtilSetup01.eps
Factory Reset (Factory Reset All)
Playing or Recording a Song
(10. Song)
Saving a Setup (11. Setup Write)
V-Piano-Grand_e.book 72 ページ 2011年2月10日 木曜日 午後12時4分