131
Disk-Related Functions (Disk Mode)
Disk-Related Functions (Disk Mode)
Here you can load a project from disk into the internal work area
(Load), or save the project that is in the work area (Save). You can
also format a disk, or copy files and folders.
In this chapter, we will collectively refer to internal memory and
memory cards as “disks.”
About Disk Utility
Disk Utility contains the following functions. In the DISK UTILITY
MENU screen, you can select the desired function and execute it.
Load Project
This function loads project data from disk into the V-Synth’s work
area.
→
p. 132
Save Project
This function saves project data to disk.
→
p. 132
Clean Project
Clean up a disk by deleting unwanted files.
→
p. 133
Import Files
Import individual patch or wave files.
→
p. 133
Format
Initialize (format) a disk.
→
p. 134
Tools
Copy or move a file or folder.
→
p. 135
Basic Disk Utility Operations
1.
If you are using a memory card, insert the appropriate
memory card into the PC CARD slot.
2.
Press [MODE] to access the V-SYNTH MODE MENU window.
3.
Touch <Disk>.
The DISK UTILITY MENU screen appears.
fig.06-01_50
4.
Touch the button for the function that you want to execute.
The screen for the function you intend to execute appears.
fig.06-02.e
For details on operations in the Disk Utility screens, refer to the
explanations on the following pages.
5.
Verify the contents of the screen, and touch <OK> to
execute.
When the operation is completed, the display will briefly
indicate “COMPLETED!.”
To cancel the operation, touch <Cancel>.
6.
Press [EXIT] to exit Disk mode.
Never turn off the power of the V-Synth while performing an
operation in Disk mode. Doing so may destroy the files.
Disk to which the function to be executed will apply
Path of the current project
Path of the selected file/folder
Disk free space
List of files stored
on the disk
Reference_e.book 131 ページ ２００５年３月１０日 木曜日 午後５時６分
To Next Page
Loading...
Need help?
General
