Roland V-Synth User Manual

25
Basic Touch Screen Operation
Quick Start
Editing a Value
To edit a value, you can use the VALUE dial, [INC/+] [DEC/-], or drag on the touch
screen.
• In each V-Synth screen, you can select a value using the cursor as described
earlier, and modify its value.
• Each parameter has its own range of possible values. You cannot set any value
smaller than the minimum value or greater than the maximum value.
VALUE Dial
Turning the VALUE dial clockwise increases the value, and turning it
counterclockwise decreases its value. Hold down [SHIFT] as you move the VALUE
dial to increase value increments to make large value changes more quickly.
fig.01-10
[INC/+] and [DEC/-]
Press [INC/+] to increase the selected value, and [DEC/-] to decrease it. Keep the
button pressed for continuous adjustment. For faster value increases, keep [INC/+]
pressed down and press [DEC/-]. To decrease values quickly, keep [DEC/-] pressed
down and press [INC/+].
fig.01-11
Touch Screen
Touch a parameter value, and drag your finger up/down or left/right. Dragging
upward or to the right increases the value, and dragging downward or to the left
decreases the value.
fig.01-12
Reference_e.book 25 ページ ２００５年３月１０日 木曜日 午後５時６分

Roland V-Synth Specifications

General

Brand	Roland
Model	V-Synth
Category	Electronic Keyboard
Language	English