Roland V-Synth User Manual

20
Getting Ready
Connecting an Amp and Speaker System
Since the V-Synth contains no amplifier or speakers, you’ll need to connect it to
audio equipment such as a keyboard amplifier, monitor speaker system or home
stereo, or use headphones to hear its sound.
Here we will explain example connections that use mainly the MAIN OUT jacks.
921
1
Before hooking anything up, make sure that the power on all of your
gear is turned OFF.
2
Connect one end of the supplied power cable to the V-Synth, and the
other end to a power outlet.
3
Connect the V-Synth to your amp/speaker system.
fig.Q-01.e
Use audio cables to connect audio equipment such as an amp or speakers. If you’re
using headphones, plug them into the PHONES jack.
For details on the settings you need when connecting the V-
Synth to your computer, refer to “ Connecting to Your
Computer via USB (USB Mode) ”(p. 138).
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.
Monitor speakers
(powered)
Power amp
Mixer etc.
Stereo headphones
to Power outlet
In order to fully experience the
V-Synth’s sound, we
recommend using a stereo
amp/speaker system. If you’re
using a mono system,
however, make your
connections to the V-Synth’s
MAIN OUT jack L (MONO).
Audio cables are not included
with the V-Synth. You’ll need
to provide them.
Reference_e.book 20 ページ ２００５年３月１０日 木曜日 午後５時６分

Roland V-Synth Specifications

General

Brand	Roland
Model	V-Synth
Category	Electronic Keyboard
Language	English