52
Creating a Patch
Turning Off the Power
1
Before you turn off the power, consider these two questions:
• Have the volume controls for the V-Synth and all connected audio devices been
turned to their lowest settings?
• Have you saved your V-Synth sounds or other data you’ve created? (p. 51)
2
Turn off the power for all connected audio devices.
3
Turn off the POWER switch located on the rear panel of the V-Synth.
fig.Q-02.e
945
* If you need to turn off the power completely, first turn off the POWER switch, then unplug
the power cord from the power outlet. Refer to
Power Supply
(p. 4).
ON OFF
Reference_e.book 52 ページ 2005年3月10日 木曜日 午後5時6分