84
Broadcasting
Configure the Broadcasting settings for the product.
Available in TV mode only.
Auto Tuning
MENU m → Broadcasting → Auto Tuning → ENTER E
Broadcasting
Auto Tuning
Aerial
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
Terrestrial
-
The displayed image may differ depending on the model.
-
Available in TV mode only.
The Auto Tuning function memorizes all channels that are available over the aerial or through your cable system and adds
them to the Channel List.
To start Auto Tuning, follow these steps:
Auto Tuning
To start Auto Tuning, follow these steps:
1
Push MENU m → Broadcasting → Auto Tuning → Auto Tuning → ENTER E on your remote. The Auto Tuning
screen appears.
2
On the Auto Tuning screen, select the source of your product signal.
―
Terrestrial: If your product is connected to an antenna choose Terrestrial, and then press ENTER E. The product will
automatically start memorizing channels.
―
Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.
―
Select Digital & Analogue, Digital or Analogue to scan for channels.
3
Sets Search Mode using / buttons. When done, select Scan, and then press ENTER E. The product will start
memorizing channels.
―
Channel memorization can take up to 45 minutes, depending on your cable system.
―
Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel
buttons on your remote.
Chapter 08
To Next Page
Loading...
Need help?
General
