[ ENGLISH ]
Preparation
It is very important to ensure that the Hand strap has beencorrectly adjusted before you begin your recording.
The Hand strapenables you to:
- Hold the Camcorder in a stabte,comfortable position.
- Press the ZOOl_land Start/Stop button without having to change the position of your hand.
Hand Strap
t. Insertthe Hand strap intothe
Hand strap hook on the front side
of the Camcorder and pull its end
through the hook.
2. Insert yourhand intothe hand
strap and adjust its tengthfor
your convenience.
3. Ctosethe Hand strap.
When You carry Your Camcorder
t. Pull and open the Hand strap
cover to release the Hand strap.
2. Remove itfrom the ring and
adjust its length.
3. Put your handthrough the Hand
Strap and dose the cover of
Hand Strap.
Attaching the Lens Cover
t. Hook upthe Lens cover with the
Lens cover strap as illustrated.
2. Hook upthe Lens cover strap to
the Hand strap, and adjust it
following the steps as described
for the Hand strap
,4_ Close the Hand strap.
To Next Page
Loading...
Need help?
General