[ ENGLISH ]
Basic Recording
+ The Zoom function works in both Camera and MCam modes.
+ Zooming is a recording technique that lets you change the size of the subject in a scene.
+ You can zoom using variable zoom speeds.
+ Use thesefeatures for different shots. Please note that over-use of the Zoom feature can lead to unprofessional looking
results and a reductionof battery usage time.
1. Move the Zoom lever slightly for a gradual zoom, move it further
for a high-speed zoom.
• Your zooming is monitored on the OSD.
2. T(Telephoto)side: Subject appears closer.
3. W(Wide angle) side: Subjectappears farther away.
• You can record a subject that is about !0mm (about0.5 inch)
away from the lens surface in the Wide position.
I TELE ]
WiDE
+ Tele Macro Function works in both Camera and MCam mode.
+ Effective focal distance in tele macro mode is 50 Cm (19.7 inches) ~ 100 Cm (39.4 inches).
1. Press the MACRO button.
• Tele Macro Icon ( _ ) will be displayed.
2. If you want to cancel the Tele Macro function, press the MACRO button again.
[ Notes ]
i hen recording in Tele Macro mode, the focus speed may be slow.
When you operate the Zoom function in the TeIe Macro mode, the recording subject
may be out of focus.
Use a tripod to prevent hand shake in the TeIe Macro mode.
Avoid shadows when recording in the Tele Macro mode.
As the distance to the sub ect decreases, focusing area narrows.
When you can not get proper focus, use the Zoom ever.
[] 03940
4x
[] 25mi_
To Next Page
Loading...
Need help?
General