ENGLISH
9292
USB Interface
(SC-D362/D363/D364/D365/D366 only)
1. Connect a USB cable to the USB jack on the PC.
■
If a USB cable is connected to the
Camcorder's USB jack, the Audio/Video
Cable and Multi Cable are disabled.
2. Connect the other end of the USB cable
into the USB jack on the Camcorder.
(USB jack)
■
If PC is connected with the USB to the
Camcorder, only the [Power] switch,
[Mode] switch, [Zoom] lever can be
operated.
Disconnecting the USB Cable
✤ After completing the data transmission, you must disconnect the
cable in the following way:
1. Select the removable disc icon and click the right mouse button to
select <Eject>.
2. Select <Confirm> and disconnect the USB cable when the Windows
Splash screen appears.
[ Notes ]
■
If you disconnect the USB cable from the PC or the Camcorder while
transferring, the data transmission will stop and the data may be
damaged.
■
If you connect the USB cable to a PC via a USB HUB or
simultaneously connect the USB cable along with other USB devices,
the Camcorder may not work properly. If this occurs, remove all USB
devices from the PC and reconnect the Camcorder.
Connecting to a PC
1. 將 USB 纜線連接到電腦上的 USB 揷孔0
■
若攝錄放影機的 USB 揷孔連接了
USB 纜線，聲訊/視訊纜線和 Multi 纜
線將被停用0
2. 將 USB 纜線的癩一端連接到攝錄放影機
上的 USB 揷孔0（USB 揷孔）
■
若使用 USB 將電腦連接到攝錄放影
機，只有 [Power]
（（電電源源））
開關/
[Mode]（模式）開關/ [Zoom]
（（縮縮放放））
桿
可以操作0
拔拔下下
USB
纜纜線線
✤ 在完成資料傳輸後，舅必須透過以下方式拔下纜線：
1. 選擇可隷式磁勒圖示，然後按一下滑鼠右鍵選擇 <Eject>0
2. 選擇 <Confirm> 橙在 Windows 啓始怜面出現時拔下 USB 纜線0
[
附附註註
]
■
若舅在傳輸期間從電腦或攝錄放影機拔下 USB 纜線，資料傳輸會停
止，而資料可能損壞0
■
若舅透過 USB 集線器將 USB 纜線連接到電腦或同時與其他 USB 裝
置連接 USB 纜線，攝錄放影機可能無法正確操作0 若發生這種情況，
請從電腦隷下所有 USB 裝置橙重新連接攝錄放影機0
連連接接至至電電腦腦
USB
介介面面（（僅僅限限
SC-D362/D363/D364/D365/D366
））
00970F SCD363 TAI~094 1/12/06 3:44 PM 페이지92 001 QMS 1660E
To Next Page
Loading...
Need help?
General