599
Adjusting the Print Speed
The adjustment of the print speed not only changes the speed of printing but also affects the print
quality.
The setting range of the print speed varies depending on the following print resolution:
Resolution CL4NX CL6NX
203 dpi
(8 dots/mm)
2 to 10 (inches/sec) (50.8 to 254 mm/
sec)
2 to 10 (inches/sec) (50.8 to 254 mm/
sec)
305 dpi
(12 dots/mm)
2 to 8 (inches/sec) (50.8 to 203.2 mm/
sec)
2 to 8 (inches/sec) (50.8 to 203.2 mm/
sec)
609 dpi
(24 dots/mm)
2 to 6 (inches/sec) (50.8 to 152 mm/
sec)
-
• When the [Printing] > [Advanced] > [Prioritize] menu has been set to [Commands], the
data will be printed with the print speed specified by command.
• While the print job is paused, the [Adjustments] menu will appear instead of the
[Settings] menu and you can adjust the print speed.
• If the optional linerless cutter kit is installed to CL4NX, the setting range is 2 to 6
(inches/sec) (50.8 to 152 mm/sec) regardless of the printing resolution.
1.
When the printer is in Online mode, press the button to change the printer to
Offline mode.
2.
Press the button to show the [Settings] menu.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
