SATO CL6NX User Manual

Printer Memory and USB Memory
60
Printer Memory and USB Memory
The memory of the user area of the printer is a maximum of 679 MB.
However, you cannot use the whole memory of the user area, because this area is also used for the
log data and HEX dump functions.
USB memory can be connected to the printer. There is no capacity limit for USB memory.
There are two USB connectors (Type A) at front and back of the printer. USB memory can be
connected to either connectors.
What you can do with this printer while it is connected to USB memory is as follows:
• Get the HEX dump data
• Install certificates used for Wi-Fi authentication and for HTTPS
• Get the barcode check log data
• Create clone data (copy the printer settings information)
• Be sure to perform a virus check on the USB memory before connecting it to the
printer. SATO Corporation shall not be held responsible for any printer malfunctions
caused by a virus spread via USB memory.
• The printer does not support USB memory with security functions such as fingerprint
authentications.
• The printer does not support connection through the USB HUB.

SATO CL6NX Specifications

General

Flash memory	2000 MB
Storage media	Flash
Internal memory	256 MB
Built-in barcodes	Code 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity	2 GB
Cables included	AC
Maximum roll diameter	220 mm
Maximum printing width	167.5 mm
Printing media thickness	0.08 - 0.268 µm
USB port	Yes
USB connector	USB Type-A / USB Type-B
Bluetooth version	3.0
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Connectivity technology	Wired & Wireless
Wi-Fi	No
Display type	LCD
Product color	Black
Display diagonal	3.5 \
Display resolution	320 x 240 pixels
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 80 %
Type	POS printer
Print speed	10 ips
Print technology	Direct thermal / Thermal transfer
Maximum resolution	203 x 203 DPI

Weight and Dimensions

Depth	457 mm
Width	338 mm
Height	321 mm
Weight	20000 g