SED GPH-610R User Manual

SED GPH-610R User Manual
- 35 -
2 During a group or broadcast call, you can
enter the number of the group call or broadcast
call in standby mode. The handheld
automatically joins the group call or broadcast
call.
Occupying uplink during an ongoing group
call
During a group call, the screen prompts you to
 Press the PTT key if the right to speak is
available. In this case, you can hold the
PTT key to gain the right to speak.
If you successfully gain the right to speak,
the handheld prompts you to speak. In
this case, you can address the group.
 If you release the PTT key, you will
resume listening only, and the previous
listeners will be indicated by a Roger
beep. If no prompt for speaking is
displayed on the screen, you can only
listen to the group call.
Note: You cannot occupy the uplink of an
ongoing broadcast call.
Receiving a point-to-point call in an ongoing
group call or broadcast call
When you receive a point-to-point call during a
group or broadcast call, the handheld notifies
you that you have a new paging message.
 Press to return to the standby
mode to wait for the alert tone message
of this paging message, or press
to ignore it.
You may also
 Press to wait for the alert tone
message of this paging message.
Before this:
If you have the right to speak in a group call,
release this right and exit the group call.
If you are a listener during a group call, exit the
group call.
If you are the initiator of a broadcast call, end
the broadcast call.
If you are the recipient of a broadcast call, exit
the call temporarily.
www.malux.se

SED GPH-610R Specifications

General

Brand	SED
Model	GPH-610R
Category	Handsets
Language	English