Siemens SINUMERIK 808D ADVANCED Parameter Manual

11604 ASUP_START_PRIO_LEVEL N01 K1, TE3, TE7
- Priorities from which 'ASUP_START_MASK' is effective DWORD PowerOn
-
808d-me42 - 7 0 128 2/2
808d-me62 - 7 0 128 2/2
808d-te42 - 7 0 128 2/2
808d-te62 - 7 0 128 2/2
808d-mte40 - 0 0 128 2/2
808d-mte60 - 0 0 128 2/2
Description: This machine data defines the ASUB priority from which MD11602 $MN_ASUP_START_MASK is
to be applied. MD11602 $MN_ASUP_START_MASK is applied from the level specified here up
to the highest ASUB priority level 1.
Related to:
MD11602 $MN_ASUP_START_MASK
11610 ASUP_EDITABLE N01 K1
- Activation of a user-specific ASUB program DWORD PowerOn
-
- - 0 0 0x7 2/2
Description: This MD determines whether user-specific routine: _N_ASUP_SPF stored in directory
_N_CUS_DIR/ _N_CMA_DIR is to be used to process RET and REPOS. The user ASUB is
searched for first in _N_CUS_DIR.
Value: Meaning:
0 Routine _N_ASUP_SPF is not activated for either RET or REPOS.
Bit0 = 1 User-specific routine _N_ASUP_SPF is executed for RET, the routine supplied
by the system is executed for REPOS.
Bit1 = 1 User-specific routine _N_ASUP_SPF is executed for REPOS, the routine
supplied by the system is executed for RET
Bit0= + bit1 = 3 User-specific routine _N_ASUP_SPF is executed for both RET and REPOS
Bit2 = 1 User ASUB _N_ASUP_SPF is searched for first in _N_CMA_DIR
Related to:
MD11612 $MN_ASUP_EDIT_PROTECTION_LEVEL
11612 ASUP_EDIT_PROTECTION_LEVEL N01 K1
- Protection level of the user-specific ASUB program DWORD PowerOn
-
- - 2 0 7 2/2
Description: Protection level of the user-specific ASUB program for RET and/or REPOS
The data is active only if MD11610 $MN_ASUP_EDITABLE is set to a value other than 0.
This machine data defines the protection level of the program _N_ASU_CUS.
MD irrelevant for:
MD11610 $MN_ASUP_EDITABLE set to 0
Related to:
MD11610 $MN_ASUP_EDITABLE
11622 PROG_EVENT_PATH N01 -
- Call path for PROG_EVENT BYTE PowerOn
-
808d-me42 - 2 0 3 0/0
Machine data
3.2 General machine data
Parameter Manual
74 Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1

Siemens SINUMERIK 808D ADVANCED Specifications

General

Brand	Siemens
Model	SINUMERIK 808D ADVANCED
Category	Control Unit
Language	English