Settings
for
the
system
(SYSTEM
menu)
You can use the SYSTEM menu to set the size
and distance
of
the speakers connected to this
system.
Select "7-SYSTEM" in the amplifier menus.
For details on adjusting the parameters, see
"Navigating through menus" (page 37) and
"Overview
of
the menus" (page 38).
SYSTEM menu parameters
• SW SPK (Sub woofer)
• NO
If
you have not connected a sub woofer,
select "NO". This activates the bass
redirection circuitry and outputs the LFE
signals from other speakers.
• YES
If
you have connected a sub woofer, select
"YES".
Tip
In order to take full advantage
of
the Dolby Digital
bass redirection circuitry, we recommend setting the
sub woofer's cut
off
frequency
as
high as possible.
• FRT SPK (Front speakers)
• SMALL
If
the sound is distorted, or you feel a lack
of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
"SMALL", the centerand surround speakers
are also automatically set to "SMALL"
(unless previously set to "NO").
• LARGE
If
you connect large speakers that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE". When the sub woofer is set to
"NO", the front speakers are automatically
set to "LARGE".
• CNT SPK (Center speaker)
• NO
If you have not connected a center speaker,
select "NO". The sound
of
the center
channel will be output from the front
speakers.
• SMALL
Ifthe sound is distorted, or you feel a lack
of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
center channel bass frequencies from the
front speakers (if set to "LARGE") or sub
woofer.
• LARGE
If
you connect a large speaker that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE". However, if the front speakers
are set to "SMALL", you cannot set the
center speaker to "LARGE".
• SUR SPK (Surround speakers)
The surround back speakers will be set to the
same setting.
• NO
If you have not connected surround
speakers, select "NO".
• SMALL
If
the sound is distorted, or you feel a lack
of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other "LARGE" speakers.
• LARGE
If
you connect large speakers that will
effectively reproduce bass frequencies,
select "LARGE". Normally, select
"LARGE". However, if the front speakers
are set to "SMALL", you cannot set the
surround speakers to "LARGE".
o
"0
CD
...
Q)
-
ci'
j
en
continued------
47
us
To Next Page
Loading...
Need help?
General
Weight and Dimensions
