Selecting
a
pre-
programmed
sound
field
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no LFE signal, which
is
a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for
"NE06
erN"
or
"NE06
MUS" when all speakers are set to "LARGE".
Notes
- This function does not work when ANALOG
DIRECT is selected.
- DTS Neo:6 does not work for DTS 2CH audio, the
sound is played back as 2 channel.
- Dolby Pro Logic IIx decoding does not function for
DTS format signals
or
for signals with a sampling
frequency
of
more than 48 kHz.
Tip
When a multi channel signal is input, only Dolby
Pro Logic IIx decoding is effective. When you select
decoding modes other than Dolby Pro Logic IIx,
multi channel sound (being encoded) is output.
You can take advantage
of
surround sound
simply by selecting one
of
the receiver's pre-
programmed sound fields. They bring the
exciting and powerful sound
of
movie theaters
and concert halls into your home.
SAT
TV
SA-CDICD
TUNER
0000
2CH
-fl-o+
....
~~!!
"J:,D.M..QYIE
"'!l.--~.I-io-~
-11-_
MUSIC
.;.}.o~Pl.l~-
MOVIE
AUTO
CAL
-CO-CU-CVDO
G
D.SKlP
Press MOVIE repeatedly to select a
sound field for movies or press
MUSIC repeatedly to select a
sound field for music.
For details, see "Types
of
sound field
available" (page 54).
-m
~
~:
~
(,Q
en
c
...
a
c
~
c.
en
o
c
~
c.
continued------
53
US
To Next Page
Loading...
Need help?
General
Weight and Dimensions
