Listening
to
the
sound
without
any
adjustment
(ANALOG
DIRECT)
You can switch the audio
of
the selected input
to two channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volumeand
front speaker balance can be adjusted.
@ ( @~o )
Sound field 1 2
buttons
1 Turn INPUT SELECTOR
on
the
receiver to select the input you
want to listen to
in
analog
audio.
You can also use the input buttons on the
remote.
2 Press ANALOG DIRECT on the
receiver.
The analog audio
is
output.
To cancel ANALOG DIRECT
Press ANALOG DIRECT on the receiver
again.
You can also press any sound field buttons.
Notes
• When headphones are connected,
"HP
DIR"
appears on the display.
• This function is not available when DMPORT, XM
RADIO and BD input
is
selected.
56
US
Resetting
sound
fields
to
the
initial
settings
Be sure to use the buttons on the receiver for
this operation.
1,2
'5
'0"
.@.C=!~0
2
1 Press
IIC,)
to turn off the power.
2 While holding down 2CH, press
I/C,).
"S.F. CLR." appears on the display and
all sound fields are reset to their initial
setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
