Preparing
Control
for
HDMI
function
This receiver supports the Control for HOMI-
Easy Setting function.
This function is only available for certain
types
of
TV. When you perfonn the Control
for HOMI-Easy Setting from the TV, the
Control for HOMI setting on this receiver will
automatically change accordingly.
During Control for HOMI-Easy Setting
operation, "CONTROL", "SCAN FOR" and
"HOMI" appear sequentially in the display.
This receiver will automatically change the
input to HOMI input. When the setting
is
completed, "COMPLETE" appears on the
display.
For details, refer to the operating instructions
of
the TV.
If
your TV does not support the Control for
HOMI-Easy Setting function, do the following
procedures. For details on setting the TV and
connected components, refer to the operating
instructions
of
the respective components.
1 Make sure that the receiver is connected to
the TV and components (compatible with
Control for HOMI function) via HOMI
connection.
2 Turn on the receiver, TV and connected
components.
3 Set the respective Control for HOMI
function for the receiver and TV to on.
See "To set Control for HOMI" below.
For details on setting the
TV,
refer to the
operating instructions
of
the
TV.
4 Select the HOMI input
of
the receiver and
TV to match the HDMI input
of
the
connected component, so that the image
from the connected component is displayed.
5 Set the Control for HOMI function for the
connected component
to
on.
If
the Control for HOMI function for the
connected component
is
already set to on,
you do not need to change the setting.
6 Repeat step 4 and 5 for other components
that you want to use the Control for HOMI
function.
Notes
•
If
you unplug and reconnect the HOMI cable, be
sure to repeat steps I to 6 above.
•
You
cannot perform One-Touch Play and System
Audio Control during Control for HOMI-Easy
Setting operation.
• Before you do the Control for HOMI-Easy Setting
from the
TV,
be sure to
tum
on the
TV,
connected
components and receiver.
•
If
the playback components cannot function after
you have made the settings for Control for HOMI-
Easy Setting, check the Control for HOMI setting
on your
TV.
•
If
the connected components do not support
Control for HOMI-Easy Setting, you need to set
the Control for HOMI function for the connected
components to on before you perform the Control
for HOMI-Easy Setting from the
TV.
-
o
o
::::s
-
a
0'
....
:::z::
c
3:
-
To Next Page
Loading...
Need help?
General
Weight and Dimensions
