Recording
using
the
receiver
You can record from an audio/video
component using the receiver. Refer to the
operating instructions supplied with your
recording component.
Rec~rd~ingollto.a
CD~
';··';'/;,;-·Y:>',\;
You can record onto a CD-R using the
receiver. Refer to the operating instructions
supplied with your
CD
recorder.
1 Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the playback
component for playing.
For example, tune to the radio station you
want to record (page 57).
3 Prepare the recording
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
4 Start recording on the
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R
OUT
jacks.
80
US
Recording
onto.
~e~o,ding
media·)~
..•... ..
1 Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3 Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (VIDEO I) for
recording.
4 Start recording on the
recording component, then
start playback on the playback
component.
Note
Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the source.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
