..
*
Other
Operations
Switching
between
digital
and
analog
audio
(INPUT
MODE)
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either
of
them, or switch from one to the other,
depending on the type
of
material you intend
to watch.
1 Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
• AUTO
Gives priority to digital audio signals when
there are both digital and analog
connections.
If
there are no digital audio
signals, analog audio signals are selected.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN
(UR)
jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function
is
being
used, the audio input mode
is
set to "ANALOG"
automatically. You cannot select other modes.
Listening
to
digital
sound
from
other
inputs
(DIGITAL
ASSIGN)
You can reassign digital audio input that has
OPTICAL or COAXIAL (SAT IN, DVD IN)
signals to another input when they are not
currently being used.
For example, to output the sound source for
the DVD player using the OPTICAL IN jack
on the receiver:
• Connect the optical output
jack
of
the DVD
player to the OPTICAL SAT IN jack
of
the
receiver.
• Assign "SAT OPT" to "DVD" in the
"D. ASSIGN" setting.
1 Press AMP MENU.
"I-LEVEL"
appears on the display.
2 Press
+'+
repeatedly to select
"5-AUDIO".
3 Press
8)
or + to enter the
menu.
4 Press
+'+
repeatedly to select
"D. ASSIGN".
5 Press
8)
or + to enter the
parameter.
6 Press
+'+
repeatedly to select a
vacant digital audio input
("SAT OPT"
in
the example).
7 Press
8)
or + to enter your
selection.
continued-----
75
US
To Next Page
Loading...
