'"
.
:.
Using
the.
Remote
Changing
button
assignments
You can change the factory settings
of
the
input buttons to suit the components in your
system. For example,
if
you connect a DVD
recorder to the VIDEO 1jacks on the receiver,
you can set the VIDEO I button on this remote
to control the DVD recorder.
1 Hold down the input button of
which you want to change the
assignment.
Example: Hold down VIDEO
1.
2 Referring to the table below,
press the corresponding
button for the category you
want.
Example: Press 4.
Now you can use the VIDEO 1 button to
control the DVD recorder.
Categories and the
corresponding buttons
Categories Press
VCR (command mode VTR
3)a)
I
VCR (command mode VTR
2)a)
2
DVD player/DVD recorder 3
(command mode DVDI)b)
DVD recorder
4
(command mode DVD3)b)
CD player
5
Euro Digital Satellite Receiver 6
DVR (Digital CATV terminal) 7
DSS (Digital Satellite Receiver)
8
Blu-ray disc player
9
(command mode BD1)c)
Blu-ray disc recorder
0/10
(command mode
BD3)C)
TV
.1>101
CLEAR
Not assigned
ENTER!
MEMORY
a)
Sony VCRs are operated with a VTR 2
or
VTR 3
setting which corresponds to 8 mm and VHS
respectively.
b)Sony DVD recorders are operated with a DVDI or
DVD3 setting. For details, refer
to
the operating
instructions supplied with the DVD recorders.
c)For details on the BDI
or
BD3 setting, refer to the
operating instructions supplied with the Blu-ray
disc player or Blu-ray disc recorder.
To clear all remote button
assignments
Press
I/~,
DMPORT and MASTER VOL - at
the same time.
The remote is reset
to
its factory settings.
81
US
-
c:
rn
::s
to
-
':j
CI)
JJ
CI)
3
o
-
CI)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
