Listening/watching
a
connected,
]
component,through
DMPO~T',~
connection"
·1
1 Press DMPORT.
You can also use the INPUTSELECTOR
on the receiver to select "DMPORT".
2 Start playbackof the connected
component.
The sound
is
played back on the receiver
and the image appears on the TV.
For details, refer to the operating
instructions supplied with the DIGITAL
MEDIA PORT adapter.
Notes
• Depending on the type
of
DIGITAL MEDIA
PORT adapter, you can operate the connected
component by using the remote. For details on the
remote button operation, see page 10.
• Be sure you have connected the MONITOR
OUT
of
the receiver to the TV (page 77).
Tip
When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press MUSIC repeatedly to select
"PORT
ABLE" (page 53).
78
US
Naming
inputs
You can enter a name
of
up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for labeling the jacks with
the names
of
the connected components.
1 Press the input button to select
the input you want to create an
index name for.
You can also use INPUT SELECTOR on
the receiver.
2 Press AMP MENU.
"I-LEVEL"
appears on the display.
3 Press
+1+
repeatedly to select
"5-AUDIO" or "6-VIDEO".
4 Press e or
..
to enter the
menu.
5 Press
+1+
to select "NAME IN".
6 Press e or
..
to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name" (page 60).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
