Changing
the
display
You can check the sound field, etc.,
by
changing the infonnation on the display.
Be
sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows.
All inputs except the FM and AM
band and XM Radio
Index name
of
the input*
-+
Selected
input-+
Sound field currently applied
FM
and AM band
Preset station name*
-+
Frequency
-+
Sound
field currently applied
XM Radio
Channel name
-+
Channel number
-+
Category name
-+
Artist name/Feature
-+
Song/program title
-+
Signal strength
-+
Sound field currently applied
* Index name appears only when you have assigned
one to the input
or
preset station (page 60, 78).
Index name does not appear when only blank
spaces have been entered, or
it
is the same as the
input name.
Note
Character
or
marks may not be displayed for some
languages.
Using
the
Sleep
Timer
You can set the receiver
to
turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically
as
follows:
2-00-00
--
1-30-00
-+
1-00-00
-+
0-30-00
-+OFF
When sleep timer
is
activated, the display
dims.
Note
If
you press any buttons on the remote
or
receiver
after the display dims, the display brightens
up.
After a while, the display dims again
if
no button
is
pressed.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display.
If
you press SLEEP again, the sleep
timer will be canceled.
o
-
::::r
CD
...
o
"C
CD
...
I»
-
c)'
:::J
en
To Next Page
Loading...
Need help?
General
Weight and Dimensions
