-
In
case of poor
FM
stereo
reception
If
the FM stereo reception is poor and
"ST"
flashes on the display, select monaural audio
so that the sound will be less distorted.
Press FM MODE repeatedly until the
"MONO"
indicator lights up on the display.
To return to stereo mode, press FM MODE
repeatedly until the
"MONO"
indicator on the
display does not light
up.
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
"AUTO
T.".
3 Turn TUNING +
or
TUNING
-.
1 Press TUNER repeatedly to
select the FM or AM band.
2 Press TUNING + or TUNING
-.
Press TUNING + to scan from low to
high; press TUNING - to scan from high
to low.
The receiver stops scanning whenever a
station is received.
10
kHz*
AM
11+-11--
FM
MODE
100 kHz
FM
U,CA
Area code
'.
Tuner
Operations
, ,
VIDEOl
.
VIDE02
BD
0000
SAT
TV
SA-<:DlCO
TUNER
000
1
2CH
AiD.
~
MOVIE
MUSIC
00,.00
2
Aulomatic
tuning.
*
The
AM tuning scale can be changed (page 90).
You can listen
to
FM and
AM
broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
26).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 3.
Listening
to
FM/AM
radio
57
US
To Next Page
Loading...
Need help?
General
Weight and Dimensions
