FUEL SYSTEM 5-9
Filter
Inspect pump suction filter for clog or other damage.
Replace or clean if necessary.
INSPECTION
NOTE:
If cracks, excessive wear or other damage is found on any com-
ponent, replace component.
Needle valve / Valve seat
Inspect needle valve and valve seat for groove, other damage
or dirt.
Replace or clean if necessary.
7. Remove high pressure fuel pump A and grommet B from
separator cover and then disconnect pump lead wire con
nector.
Float
Inspect float for crack or other damage.
Replace if necessary.
To Next Page
Loading...
Need help?
General
