MID UNIT 7-3
DRIVESHAFT HOUSING AND OIL PAN
REMOVAL
1. Remove power unit. (See pages 6-5 to 6-8)
2. Remove lower unit. (See page 9-2)
3. Disconnect water hose 1 and 2.
4. Remove screw and bonding wire from driveshaft housing.
5. Remove the clutch rod 3.
6. Remove lower mount cover bolts 4 and PORT/STBD lower
mount covers 5.
7. Remove STBD / PORT lower mount nuts 6 and lower mount
bolts 7.
8. Remove lower mount assembly 8.