16-32
DF90/115/140 “K6” (’06) MODEL
2. Apply Suzuki Bond No.1207B onto the outer-surface of
water pump sleeve.
Install the water pump sleeve into the water pump case by
confirming the boss on the sleeve should be meeting with
the groove on the pump case.
99000-31140: Suzuki Bond No. 1207B
3. Install the pump case No.1 seal into the water pump case.
Install the water pump case assembly on the gearcase.
WATER PUMP TUBE
The water pump tube has been changed in shape.
EXHAUST SEAL RUBBER
The exhaust seal rubber has been changed in shape.
Pump case No.1 seal
2 mm 4 mm
2 mm 4 mm
29 mm 33 mm
26 mm 28 mm
To Next Page
Loading...
Need help?
General
