To Next Page

To Previous Page

6-12 POWER UNIT

OIL PUMP

REMOVAL

1. Remove power unit. (See page 6-5 to 6-8)

NOTE:

Hold camshaft by placing a wrench on hexagon area of cam-

shaft.

2. Remove bolt securing oil pump drive sprocket to camshaft,

then remove oil pump drive sprocket.

3. Remove three (3) bolts 1 and oil pump assembly 2.

4. Remove circlip 3, driven sprocket 4, pin 5 and washer.

INSPECTION

Oil pump

Inspect outer/inner rotors and oil pump body for wear or other

damage.

Replace if necessary.

Seal ring

Inspect of seal ring for nick, cut or wear.

Drive / driven sprocket

Inspect teeth of sprocket for wear or other damage.

Replace if necessary.

1. Oil pump dr

Oil pump dr

ive sprocket1. Oil pump drive sprocket

Suzuki DF140WT User Manual

Questions and Answers: