POWER UNIT 6-11
INTAKE MANIFOLD
Install intake manifold assembly. (See page 6-4)
FUEL INJECTOR
Install fuel injectors. (See page 5-13)
FINAL ASSEMBLY CHECK
Perform following checks to ensure proper and safe operation
of repaired unit :
• All parts removed have been returned to their original posi-
tions.
• Lower unit gear engagement is properly adjusted.
• Fuel and water hose routing match’s service manual illustra-
tion. (See page 10-8 to 10-11)
• Wire routing match’s service manual illustration.
(See page 10-2 to 10-7)
• No fuel leakage is evident when fuel system is pressurized.
(See page 5-4)
• No water leakage is evident during final test running.
To Next Page
Loading...
Need help?
General
