11-66 DF140 “K2” (’02) MODEL
3
2
1
1. Forward gear
2. Reverse gear
3. Shift rod and shifter yoke
COUNTER ROTATION LOWER UNIT (DF140Z model)
The counter rotation unit reverse gear is installed in the position where, in the normal rotation unit, the forward
gear is located.
Likewise, the counter rotation unit forward gear takes the position of normal rotation unit reverse gear.
This change of gear arrangement, however, does not affect the remote control lever operation because the
shift rod and shifter yoke have been also modified to operate in the opposite direction.
PROPELLER SELECTION FOR COUNTER
ROTATION
For counter-rotation model, newly designed stainless steel pro-
pellers are available as follows.
Suzuki highly recommend to use the genuine Suzuki counter-
rotation propeller for the counter rotation model.
In case of twin installation, always use on both engines, the
same size normal rotation and counter-rotation propellers.
Blade × Diam. (in.) × Pitch (in.)
3 × 14 × 18
3 × 14 × 20
3 × 14 × 22
3 × 14 × 24
To Next Page
Loading...
Need help?
General
