7-10 CLUTCH
CLUTCH RELEASE CAMSHAFT
REMOVAL
• Remove the cam chain tension adjuster. (!6-4)
• Disconnect the clutch cable

1 and remove the retainer

2.
• Pull the clutch release camshaft

3 out of crankcase.
INSPECTION
CLUTCH RELEASE CAMSHAFT
• Inspect the clutch release camshaft for abnormal deflection
and damage.
• If any defects are found, replace the release camshaft with a
new one.
OIL SEAL AND BEARING
• Inspect the oil seal for oil leakage and oil seal lip damage.
• Inspect the bearings for play and smooth movement.
• Replace the defective parts with a new one if necessary.
(!10-9 to -12)
CAUTION
Do not turn the crankshaft after removing the cam
chain tension adjuster.
To Next Page
Loading...
Need help?
General
