2-12 PERIODIC MAINTENANCE
ENGINE OIL CHANGE
• During inspection, hold the motorcycle in an upright position
on a level surface.
• Warm up the engine.
• Remove the filler cap, TDC plug

1, drain plug

2 and drain
No.2 plug

3. Drain oil thoroughly.
• Replace the gasket washers with new ones and tighten their
drain plugs.
$ Oil drain plug: 21 N·m (2.1 kgf-m, 15.0 lb-ft)
Oil drain No.2 plug: 6 N·m (0.6 kgf-m, 4.5 lb-ft)
• Pour specified amount of motor oil.
& SAE 10W-40, API SF/SG or SH/SJ with JASO MA
...............................................For E-03
MOTUL 300V 10W-40 (Recommendation oil) or
SAE 10W-40, API SF/SG or SH/SJ with JASO MA
...........................................The others
# Oil change.......... 900 ml (1.0/0.8 US/Imp qt)
Filter change ...... 950 ml (1.0/0.8 US/Imp qt)
Overhaul............. 1 000 ml (1.1/0.9 US/Imp qt)
• Replace the O-ring with a new one and tighten the TDC plug

1.
$ TDC plug: 14 N·m (1.4 kgf-m, 10.0 lb-ft)
• Tighten the filler cap.
• Run the engine for a few minutes and stop it. Wait a few min-
utes.
• Inspect the oil level.
To Next Page
Loading...
Need help?
General
