19
SAFETY
Operating Precautions
¡Maintain the maximum possible distance
from power lines and never violate the
minimum clearance.
¡Always contact the nearest electric utility
and determine jointly what specific
precautions must be taken to insure safety.
¡Consider all lines to be power lines and
treat all power lines as energized even
though it is known or believed that the
power is shut off and the line is visibly
grounded.
¡Use a signal person to observe the
approach of any part of the machine or
load to the power line.
¡Caution all ground personnel to stand
clear of the machine and the load at all
times.
¡If the machine should come in contact with
a live electrical source, do not leave the
operator’s seat. Do not allow anyone to
approach or touch the machine.
¡Be especially careful of buried high voltage
power lines.
Insure driver safety before
loading trucks
Do not load a truck unless the driver is in a
safe place.
¡Never swing or position the bucket over
personnel or truck cabs.
¡Load the truck from the rear.
Keep a safe distance from
electrical power lines
Never approach power lines with any part of
the machine and its load unless all local and
national required safety precautions have
been taken. Electrocution and death can
result from arcing, touching or even being
close to a machine that is in contact with or
near an electrical source.
To Next Page
Loading...
Need help?
General
