Takeuchi TB175 User Manual

38
CONTROLS
Doors and Covers
Starter Key
The starter key is used not only to start and
stop the engine, but also to lock and unlock
the following places:
¡Fuel filler cap
¡Cab door
¡Covers
Opening
1. Pull the knob (1) towards you and open
the door.
To open the door from inside the cab, push
the lever (2) to the front.
2. Open the door fully and press it against
the cab to lock it in place.
Closing
1. Either push release lever (3) to the front
or lower release lever (4).
2. Close the released door.
Cab Door
WARNING
When mounting and dismounting the
cab, first open the door fully to the locked
position and check that it does not move.
Open the door fully and press it against the
catch at the back of the door to lock it in place.
Always lock the door when mounting and
dismounting and when operating the
machine.
Lock and unlock
1. Insert the starter key and turn it.
E4B003
4
3
C4C002
C4C001
2
1
Front Window
WARNING
¡¡
¡¡
¡Grasp the handles firmly with both
hands when opening and closing the
front window. Your head or hands may
get caught if they slip.
¡¡
¡¡
¡If you open the front window, be sure
to lock it in place with the lock pins on
the left and right sides. The window
may fall if it is not locked in place.

Takeuchi TB175 Specifications

General

Brand	Takeuchi
Model	TB175
Category	Excavators
Language	English