Takeuchi TB175 User Manual

49
CONTROLS
Switches
Horn Button
Press the button on the right operating lever
to blow the horn.
Decel. Button
WARNING
Set the operating and travel levers to
neutral before operating the decel. button.
The machine’s operating speed will
change abruptly if the button is operated
while the levers are engaged.
Press the button on the right operating lever
to lower the engine speed to low idling.
Press the button again to return to the engine
speed set with the throttle or power mode
buttons.
Note: The one-touch decelerator is a device
for lowering the engine speed and reducing
fuel consumption when little engine output
is required, for example when the operating
and travel levers are in neutral.
Selector Button (2-Piece boom)
WARNING
Pressing (switching ON or OFF) the
selector button while the boom swing
pedal is depressed is dangerous, since
the attachment will move unexpectedly.
Always set the boom swing pedal back
to the neutral position before operating
the selector button.
This button changes from the boom swing
operation to the intermediate boom
operation.
Press this button to change over to operation
of the intermediate boom . The intermediate
boom operation indicator lamp will light. One
more press of this button will result in a return
to boom swing operation. Actual operation
is performed with the boom swing pedal.
L3B046
L3B0471
FC HL
L3L020

Takeuchi TB175 Specifications

General

Brand	Takeuchi
Model	TB175
Category	Excavators
Language	English