Takeuchi TB175 User Manual

218
OPTIONS
Immobilizer System
Re-Registration of the Keys
Re-register the keys in the following cases:
¡If one of the immobilizer keys is lost, re-
register the remaining keys so as to
prevent theft.
¡If you purchase new immobilizer keys,
they must be registered before they can
be used with the machine’s immobilizer
system.
¡The ID code is changed each time a key
is registered, so any keys you already
have must also be re-register.
Refer to page 216 “Immobilizer System”.
IMPORTANT: Please read and understand
the registration procedure before starting.
If you stop in the middle, you may have to
start over from the beginning.
Do not turn the key to the START ( )
position while performing the steps 3 to
12.
Registration Procedure
1. Prepare the immobilizer keys you wish to
register (key grip: black/maximum of 5
keys) and the registration key (key grip:
gray).
2. Check whether or not the engine starts
with the registration key.
If the engine does not start, it is possible
that the registration key belongs to another
product.
This matter must be checked again.
3. Insert the registration key into the starter
switch and turn it from the OFF (O) position
to the ON ( I ) position.
4. Hold for about 10 seconds.
N0B026E
Immobilizer key
Registration key
N0B029E
Registration key

Takeuchi TB175 Specifications

General

Brand	Takeuchi
Model	TB175
Category	Excavators
Language	English