Teknic POWER4-HUB User Manual

C LEAR P ATH -SC U SER M ANUAL R EV . 1.36 30
T
EKNIC , I NC . T EL . (585) 784-7454
T EKNIC IPC-3 AND IPC-5 P OWER S UPPLIES
Teknic designed the IPC-3 and IPC-5 power supplies specifically for servo
systems like the ClearPath-SC. These supplies deliver a tightly regulated
75VDC and feature large capacitor banks to prevent debilitating droop
during peak current demand. The IPC supplies also feature advanced
regenerated energy management and many built-in safety and protective
features.
Teknic IPC-3 Teknic IPC-5
Teknic 75VDC IPC family power supplies
T EKNIC M ODEL IPC-3
The IPC-3 power supply can typically power one to four ClearPath-SC
motors. The actual number depends on the application—fewer when the
motors are generating high torque continuously at high speeds, and more
when the motors are intermittently using bursts of power like in many
point-to-point positioning systems. Please visit Teknic’s website
(www.Teknic.com
) for more information, features, and specifications.
T EKNIC M ODEL IPC-5
The IPC-5—fully enclosed power supply—can typically power two to six
ClearPath-SC motors. The actual number depends on the application—
fewer when the motors are generating high torque continuously at high
speeds, and more when the motors are intermittently using bursts of
power like in many point-to-point positioning systems. Please visit
Teknic’s website (www.Teknic.com
) for more information, features, and
specifications.

Teknic POWER4-HUB Specifications

General

Brand	Teknic
Model	POWER4-HUB
Category	Engine
Language	English