Tektronix AWG70002A User Manual

AWGSYNC01
AWGSYNC01
Electrical specifications
Table 1-33:
Electrical specifications
Characteristic Description
System
Number of A
WG70001A or
AWG70002A instruments
supported
4
All instru
ments must be the same model
Output to Output Skew
(typical)
±10 ps
Repeata
bility
(typical)
≤5ps
Random
Jitter on Clock Pattern
(typical)
0.315 ps rms
Total Jitter on Random Pattern
(typi
cal)
13 ps
p-p
Calibration
Connector SMA at the Front Panel
Numb
er of inputs
4
Input Impedance
50 Ω
Clock
Cl
ock Output
Th
e external clock output is a copy of an external input clock into the sync hub. This output is
used to drive the external clock input of the AWG.
N
umber of Outputs
4
Connector SMA on rear-panel
Output Impedance 50 Ω AC coupled
Output Amplitude (typical)
+5 dBm to +10 dBm
Frequency Range
6.25 G Hz to 12.5 GHz
Clock Input The external clock input is used to create the DAC s ample clock. This clock must always operate
in the octave range specified below.
Connector SMA on rear-panel
Input Impedance
50 Ω AC coupled
1–22 AWG70000A Series and AWGSYNC01 Technical Reference

Tektronix AWG70002A Specifications

General

Brand	Tektronix
Model	AWG70002A
Category	Inverter
Language	English