Tektronix MSO5104B Printable Help

Behavior
The instrument changes the components, voltage threshold levels, polarity, word size, and bit order, and uses those to decode
the selected SPI bus.
What do you want to do next?
Learn more about bus setups.
Learn about bus configuration.
Learn about digital setups.
Learn how to set up an I2C serial bus.
Learn how to set up an SPI serial bus.
Learn how to set up a USB serial bus.
Learn how to set up an RS-232 serial bus.
Learn how to set up a MIPI DSI1 Serial Bus
Learn how to set up a MIPI CSI2 Serial Bus
Learn how to set up an 8B10B Serial Bus
Learn how to set up a CAN Bus
Learn how to set up a LIN Serial Bus
Learn how to set up a FLEXRAY Serial Bus
Learn how to set up a MIL-1553 Bus
Learn how to set up an Ethernet Bus
Learn how to set up an Custom serial bus.
Learn how to troubleshoot a serial bus.
Learn how to track down serial bus anomalies.
Learn how to view analog characteristics of a digital waveform.
Learn how to trigger on a bus.
Set up an RS-232 serial bus
NOTE. RS-232 serial bus setup is available on instruments with the SR-COMP option.
From the Bus Setup window in the Config tab, select a bus from the Bus list and then select the RS-232 Serial bus type.
NOTE. The Components for the RS-232 bus standard are set by the instrument.
For information on the controls, click the buttons.
■
Bus List
■
Display & Clear
■
Label
■
Position
■
Serial Input
Bus setups
116 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Tektronix MSO5104B Specifications

General

Brand	Tektronix
Model	MSO5104B
Category	Test Equipment
Language	English