Tektronix TDSUSB2 User Manual

Reference Suspend
Suspend
This test calculates the time between the end of last SOF and the rising edge transition to Full-speed J state
for Host / Device / Hub- upstream. This time must be between 3 ms and 3.125 ms. To get the Suspend
signal, hot-plug the unit under test (device) and measure the signalling with single-ended probes on both
lines. The application analyzes data for the Suspend Time.
188 TDSUSB2 Universal Serial Bus Measurements Package

Tektronix TDSUSB2 Specifications

General

Brand	Tektronix
Model	TDSUSB2
Category	Measuring Instruments
Language	English