Tenda AC23 User Manual

134
11.8 Static route
11.8.1 Overview
Routing is the act of choosing an optimal path to transfer data from a source address to a
destination address. A static route is a special route that is manually configured and has the
advantages of simplicity, efficiency, and reliability. Proper static routing can reduce routing
problems and overload of routing data flow, and improve the forwarding speed of data packets.
A static route is set by specifying the target network, subnet mask, default gateway, and interface.
The target network and subnet mask are used to determine a target network or host. After the
static route is established, all data whose destination address is the destination network of the
static route are directly forwarded to the gateway address through the static route interface.
To access the configuration page, log in to the web UI of the router, and choose Advanced
Settings > Static Route.
Parameter description
Parameter
Description
Destination Network
It specifies the IP address of the destination network.
When the Destination Network and Subnet Mask are both 0.0.0.0, it indicates that
this is the default route.
When the route of packets cannot be found in the routing table, the router will
forward the packets using the default route.
Subnet Mask
It specifies the subnet mask of the destination network.

Tenda AC23 Specifications

General

USB port	No
DC-in jack	Yes
Connectivity technology	Wireless
Ethernet LAN (RJ-45) ports	3
Product type	Tabletop router
Product color	Black
LED indicators	LAN, System, WAN, WLAN, WPS
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	2033 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
WLAN data transfer rate (second band)	1733 Mbit/s
VPN support	IPsec, L2TP, PPTP
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Transmit power	20/23 dBmW
Antennas quantity	7
Antenna gain level (max)	6 dBi
Output current	1.5 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Certification	CE/FCC/RoHS
Processor cores	2
Processor frequency	1000 MHz
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	144.3 mm
Width	238.9 mm
Height	40.3 mm