81
8.3 PPTP/L2TP client
8.3.1 Overview
This series of router can function as a PPTP/L2TP client and connect to PPTP/L2TP servers.
The PPTP/L2TP client function is disabled by default. When it is enabled, the page is show as
below.
Parameter description
It is used to enable or disable the PPTP/L2TP client function.
It is specifies the client type that the router serves as, either PPTP or L2TP.
⚫
PPTP: When the router is connecting to a PPTP server, choose this option.
⚫
L2TP: When the router is connecting to a L2TP server, choose this option.
Server IP
Address/Domain
Name
It specifies the IP address or domain name of the PPTP/L2TP server that the router
connects to. Generally, when a router serves as the PPTP/L2TP server at the peer side,
the domain name or IP address should be that of the WAN port whose PPTP/L2TP server
function is enabled.
It specifies the user name and password that the PPTP/L2TP server assigns to the
PPTP/L2TP clients.
It specifies the connection status of the VPN connection.