Tenda AC23 User Manual

135
Parameter
Description
Gateway
It specifies the ingress IP address of the next hop route after the data packet exits
from the interface of the router.
0.0.0.0 indicates that the destination network is directly connected to the router.
WAN
It specifies the interface that the packet exits from.
Operation
It is used to add or delete static route rules.
11.8.2 Add a static route rule
Scenario: You have an AC23 and another two routers. Router1 is connected to the internet and its
DHCP server is enabled. Router2 is connected to an intranet and its DHCP server is disabled.
Goal: You are able to access both the internet and intranet at the same time.
Solution: You can configure the static route function to reach the goal.
Assume the LAN IP addresses of these devices are:
− AC23: 192.168.0.1
− Router1: 192.168.10.10
− Router2: 192.168.10.20
The information about the intranet:
− IP address: 172.16.105.0
− Subnet mask: 255.255.255.0
Configuring procedure:
Step 1 Start a web browser on a device connected to the router and visit tendawifi.com to log in
to the web UI of the router.
Step 2 Refer to Access the internet with a dynamic IP address to configure the internet access for
AC23.
LAN: 192.168.0.1
192.168.10.10
192.168.10.20
IP address:
172.16.105.0
Subnet mask:
255.255.255.0

Tenda AC23 Specifications

General

USB port	No
DC-in jack	Yes
Connectivity technology	Wireless
Ethernet LAN (RJ-45) ports	3
Product type	Tabletop router
Product color	Black
LED indicators	LAN, System, WAN, WLAN, WPS
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
WLAN data transfer rate (max)	2033 Mbit/s
WLAN data transfer rate (first band)	300 Mbit/s
WLAN data transfer rate (second band)	1733 Mbit/s
VPN support	IPsec, L2TP, PPTP
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Transmit power	20/23 dBmW
Antennas quantity	7
Antenna gain level (max)	6 dBi
Output current	1.5 A
Output voltage	12 V
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Certification	CE/FCC/RoHS
Processor cores	2
Processor frequency	1000 MHz
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Security algorithms	WPA, WPA-PSK, WPA2, WPA2-PSK
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	144.3 mm
Width	238.9 mm
Height	40.3 mm