SECTION 6
6-36
1-/ 2-Cylinder
GEARCASE REPAIR PROCEDURES
CAUTION
DO NOT attempt gearcase repairs without proper
manufacturer special tools.
Use this section when service work requires disassembly or
replacement of the following gearcase components:
• Driveshaft roller bearings.
• Gearcase needle bearing.
•Propeller shaft housing needle bearing.
• Bevel gear A bearing outer race.
• Bevel gear A roller bearing.
Driveshaft Roller Bearings
CAUTION
If it is determined after complete inspection that
replacement of driveshaft roller bearing (1) is
necessary, all pressing operations during
removal and installation must be performed at a
qualified machine shop equipped with minimum 1
ton Press.
1
T1752
1
To Next Page
Loading...
Need help?
General
