Triumph Speed Triple Handbook

102
Maintenance and Adjustment
Speed Triple R
1. Rebound damping adjuster
The rebound damping adjuster is located at
the top of the right hand fork.
To change the rebound damping force, rotate
the adjuster clockwise to increase, or
anti-clockwise to decrease using a 3 mm allen
key. Always count the number of clicks from
the fully clockwise position noting that the
first stop (click position) is counted as zero.
Note:
• The motorcycle is delivered from
the factory with the rebound set at
10 clicks from the fully clockwise
position.
Compression Damping Adjustment
Speed Triple
1. Compression damping adjuster
The compression damping adjuster is located
near the bottom of both forks, adjacent to the
wheel spindle.
To change the compression damping force,
rotate the slotted adjuster clockwise to
increase, or anti-clockwise to decrease.
Always count the number of anti-clockwise
turns from the fully clockwise position and set
both forks to the same settings.
Note:
• The motorcycle is delivered from
the factory with the compression
damping set at 1.5 anti-clockwise
turns from the fully clockwise
position.
1
chcy_1
1
cgfi

Triumph Speed Triple Specifications

General

Transmission	6-speed
Engine Type	Liquid-cooled, 12-valve, DOHC, in-line 3-cylinder
Front Suspension	Öhlins 43mm NIX30 upside down forks, adjustable compression, rebound and preload
Rear Suspension	Öhlins monoshock, adjustable compression, rebound and preload
Front Brakes	twin 320mm floating discs
Rear Brakes	Brembo single piston caliper, 220mm disc
Fuel Tank Capacity	15.5 litres