Triumph Speed Triple Handbook

24
General Information
Once both hours and minutes are correctly
set, press button 'B' to confirm and t-SEt will
be visible in the display screen. Press and
release button 'A' until r
Eturn is visible then
press button 'B'. Trip 1 will be visible in the
display screen.
1. Clock display
2. Hours read-out
3. Minutes read-out
4. Display screen (Hour selected for
adjustment)
5. Button A
6. Button B
Changing Units (Imperial, US
or Metric)
Units has four selectable display modes as
described below:
• mpg - Imperial gallons;
• mpg US - US gallons;
• L/100 km - Metric;
•km/L - Metric.
Each display provides the following
information:
mpg (Imperial gallons)
The speedometer and odometer will read in
miles. The fuel consumption will be
measured in imperial gallons.
mpg US (US gallons)
The speedometer and odometer will read in
miles. The fuel consumption will be
measured in US gallons.
L/100 km (Metric)
The speedometer and odometer will read in
kilometres. The fuel consumption will be
measured in litres of fuel per 100 km.
km/L (Metric)
The speedometer and odometer will read in
kilometres. The fuel consumption will be
measured in kilometers per litre of fuel.
5
cfiq_12
2
3
4
1
6
Warning
Do not attempt to change the units display
with the motorcycle in motion as this may
lead to loss of motorcycle control and an
accident.

Triumph Speed Triple Specifications

General

Transmission	6-speed
Engine Type	Liquid-cooled, 12-valve, DOHC, in-line 3-cylinder
Front Suspension	Öhlins 43mm NIX30 upside down forks, adjustable compression, rebound and preload
Rear Suspension	Öhlins monoshock, adjustable compression, rebound and preload
Front Brakes	twin 320mm floating discs
Rear Brakes	Brembo single piston caliper, 220mm disc
Fuel Tank Capacity	15.5 litres