EasyManuals Logo

Triumph Speed Triple Handbook

Triumph Speed Triple
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
General Information
To exit the tyre pressure display, press and
release button 'A' to the desired display.
Sensor Batteries
When the battery voltage in a pressure
sensor is low, LO bAt will be displayed and
the TPMS symbol will indicate which wheel
sensor has the low battery voltage. If the
batteries are completely flat, only dashes will
be visible in the display screen, the red TPMS
warning light will be on and the TPMS
symbol will flash continuously. Contact your
authorised Triumph dealer to have the sensor
replaced and the new serial number
recorded in the spaces provided on page 35.
1. TPMS symbol
2. Display screen
3. Front tyre, identified
4. Rear tyre, identified
5. TPMS warning light
With the ignition switch turned to the ON
position, if the TPMS symbol flashes
continuously and the TPMS warning light
remains on there is a fault with the TPMS
system. Contact your authorised Triumph
dealer to have the fault rectified.
Tyre Pressures
The tyre pressures shown on your instrument
panel indicate the actual tyre pressure at the
time of selecting the display. This may differ
from the inflation pressure set when the tyres
are cold because tyres become warmer
during riding, causing the air in the tyre to
expand and the pressure to increase. The
cold inflation pressures specified by Triumph
take account of this.
Owners must only adjust tyre pressures when
the tyres are cold using an accurate tyre
pressure gauge (see page 10 6 ), and must not
use the tyre pressure display on the
instruments.
Replacement Tyres
When replacing tyres, ensure they are aware
that tyre pressure sensors are fitted to the
wheels and always have an authorised
Triumph dealer fit your tyres (see page 10 8 ).
hd 6
4
5
1
3
2
Warning
The tyre pressure monitoring system is not
to be used as a tyre pressure gauge when
adjusting the tyre pressures. For correct
tyre pressures, always check the tyre
pressures when the tyres are cold and
using an accurate tyre pressure gauge (see
page 10 6 ).
Use of the TPMS system to set inflation
pressures may lead to incorrect tyre
pressures leading to loss of motorcycle
control and an accident.

Table of Contents

Other manuals for Triumph Speed Triple

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Triumph Speed Triple and is the answer not in the manual?

Triumph Speed Triple Specifications

General IconGeneral
Transmission6-speed
Engine TypeLiquid-cooled, 12-valve, DOHC, in-line 3-cylinder
Front SuspensionÖhlins 43mm NIX30 upside down forks, adjustable compression, rebound and preload
Rear SuspensionÖhlins monoshock, adjustable compression, rebound and preload
Front Brakestwin 320mm floating discs
Rear BrakesBrembo single piston caliper, 220mm disc
Fuel Tank Capacity15.5 litres

Related product manuals