3. INTRODUCTION & DESCRIPTION
The word, ’tractor’ has been derived
from ‘traction’ which means pulling.
A tractor is required to pull or haul
an equipment, implement or trol-
ley which are coupled to the trac-
tor body through suitable linkage.
A tractor can also be used as a
prime mover as it has a power out-
let source which is also called Pow-
er Take or PTO shaft.
In this book the operating, mainte-
nance and storage instructions for
all models of TYM Diesel tractors
has been complied. This material
has been prepared in detail to help
you in the better understanding of
maintenance and efcient operation
of the machine.
If you need any information not giv-
en in this manual, or require the ser-
vices of a trained mechanic, please
get in touch with the TYM Dealer/
Distributor in your locality. Dealer/
Distributors are kept informed of the
latest methods of servicing tractors.
They stock genuine spare parts and
are backed by the Company’s full
support.
Through this manual. The use of
the terms LEFT, RIGHT, FRONT
and REAR must be understood, to
avoid any confusion when follow-
ing the introductions. The LEFT and
RIGHT means left and right sides of
the tractor when facing forward in
the driver’s seat, Reference to the
FRONT indicates the radiator end
of the tractor, while the REAR, indi-
cates the drawbar end.
When spare parts are required, al-
ways specify the tractor and engine
serial number when ordering these
parts. (See illustration A).This will
facilitate faster delivery and help en-
sure that the correct parts for your
particular tractor is received. The
tractor serial number is punched on
a plate attached to the left hand side
TRACTOR AN INTRODUCTION
of the engine body (Illust. A), For
easy reference, we suggest you to
write the number in the space pro-
vided in the owner’s personal data.
Right turn
(Clockwise)
Left turn
(Counterclockwise)
Right
Rear
Left
Front
J10O207A
To Next Page
Loading...
Need help?
General
